CentOS8 KVM USB设备直通虚拟机并实现热插拨

CentOS8 KVM USB设备直通虚拟机并实现热插拨目录 实现直通 查看 USB 相关信息 查看 USB 的树状信息 新建一个 xml 文件 修改对应虚拟机的 xml 配置文件 执行设备追加 支持热插拨 新增 udev 规则文件 常用命令备忘 查看硬件详细信息 查看 USB 设备描述

大家好,我是讯享网,很高兴认识大家。

目录

实现直通

查看USB相关信息:

查看USB的树状信息:

新建一个xml文件:

修改对应虚拟机的xml配置文件:

执行设备追加:

支持热插拨

新增udev规则文件:

常用命令备忘

查看硬件详细信息:

查看USB设备描述:


实现直通

查看USB相关信息:

# lsusb Bus 002 Device 003: ID 058f:6387 Alcor Micro Corp. Flash Drive Bus 002 Device 002: ID 8087:8002 Intel Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 413c:a001 Dell Computer Corp. Hub Bus 001 Device 004: ID 17ef:602d Lenovo Bus 001 Device 003: ID 17ef:602e Lenovo Bus 001 Device 002: ID 8087:800a Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

讯享网

 

查看USB的树状信息:

讯享网# lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M |__ Port 2: Dev 3, If 0, Class=Mass Storage, Driver=usbfs, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M |__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 5: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 5: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 6: Dev 5, If 0, Class=Hub, Driver=hub/6p, 480M

 

根据上面的信息,可以获取到将要直通的USB设备的如下相关信息:

Vendor id : 058f Product id :6387 Driver :ehci

 

新建一个xml文件:

讯享网# vim /etc/libvirt/W10_usb.xml

 

写入如下内容:

<hostdev mode='subsystem' type='usb' managed='yes'> <source> <vendor id='0x058f'/> <product id='0x6387'/> </source> </hostdev>

 

修改对应虚拟机的xml配置文件:

讯享网# vim /etc/libvirt/qemu/W10.xml

 

添加一行:

其中的 ehci 是在 lsusb -t 命令下获取的信息

<controller type='usb' index='1' model='ehci' />

 

执行设备追加:

其中第二个参数 W10 是虚拟机名。


讯享网

如果后面跟随 --persistent 参数则表示永久连接,如果没有此参数则只连接到本次关闭虚拟机为止。

讯享网# virsh attach-device W10 /etc/libvirt/W10_usb.xml --persistent

 

 

支持热插拨

该方法通过物理机的 udev 实现。

新增udev规则文件:

# vim /etc/udev/rules.d/vim 90-libvirt-usb.rules 

 

内容如下:

讯享网ACTION=="add", \ SUBSYSTEM=="usb", \ ATTRS{idVendor}=="058f", \ ATTRS{idProduct}=="6387", \ RUN+="/usr/bin/virsh attach-device W10 /etc/libvirt/W10_usb.xml" ACTION=="remove", \ SUBSYSTEM=="usb", \ ATTRS{idVendor}=="058f",\ ATTRS{idProduct}=="6387", \ RUN+="/usr/bin/virsh detach-device W10 /etc/libvirt/W10_usb.xml"

 

常用命令备忘

查看硬件详细信息:

# udevadm info -a -n /dev/sdb Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2': KERNELS=="2-1.2" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{authorized}=="1" ATTRS{avoid_reset_quirk}=="0" ATTRS{bConfigurationValue}=="1" ATTRS{bDeviceClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{bDeviceSubClass}=="00" ATTRS{bMaxPacketSize0}=="64" ATTRS{bMaxPower}=="200mA" ATTRS{bNumConfigurations}=="1" ATTRS{bNumInterfaces}==" 1" ATTRS{bcdDevice}=="0100" ATTRS{bmAttributes}=="80" ATTRS{busnum}=="2" ATTRS{configuration}=="" ATTRS{devnum}=="5" ATTRS{devpath}=="1.2" ATTRS{idProduct}=="6387" ATTRS{idVendor}=="058f" ATTRS{ltm_capable}=="no" ATTRS{manufacturer}=="Generic" ATTRS{maxchild}=="0" ATTRS{product}=="Mass Storage" ATTRS{quirks}=="0x0" ATTRS{removable}=="removable" ATTRS{rx_lanes}=="1" ATTRS{serial}=="8BCBA39315F5" ATTRS{speed}=="480" ATTRS{tx_lanes}=="1" ATTRS{urbnum}=="515" ATTRS{version}==" 2.00"

 

查看USB设备描述:

讯享网# lsusb -v Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x058f Alcor Micro Corp. idProduct 0x6387 Flash Drive bcdDevice 1.00 iManufacturer 1 Generic iProduct 2 Mass Storage iSerial 3 8BCBA39315F5 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0020 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 200mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0

 

OVER

 

 

 

 

 

 

 

 

 

 

 

 

 

小讯
上一篇 2025-03-20 14:34
下一篇 2025-01-08 12:24

相关推荐

版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容,请联系我们,一经查实,本站将立刻删除。
如需转载请保留出处:https://51itzy.com/kjqy/133169.html