</nav><p>Values are 32 bit and are laid out as follows. The following 讯享网
diagram is independent of endianness; that is, the diagram is shown in host byte order and merely shows the layout of the numbering space.
Any protocol that uses NTSTATUS values on the wire is responsible for stating the order that the bytes are placed on the wire.
Sev (2 bits): Severity. Severity codes are as follows.
-
Value
Meaning
STATUS_SEVERITY_SUCCESS
0x0
Success
STATUS_SEVERITY_INFORMATIONAL
0x1
Informational
STATUS_SEVERITY_WARNING
0x2
Warning
STATUS_SEVERITY_ERROR
0x3
Error
C (1 bit): Customer. This specifies if the value is customer- or Microsoft-defined. This bit is set for customer-defined values and clear for Microsoft-defined values.<4>
N (1 bit): Reserved. MUST be set to 0 so that it is possible to map an NTSTATUS value to an equivalent HRESULT value, as specified in section 2.1, by setting this bit.
Facility (12 bits): A value that, together with the C bit, indicates the numbering space to use for the Code field.<5>
Code (2 bytes): The remainder of the error code. Vendors SHOULD reuse the values in the following table with their indicated meaning or define their own values with the C bit set. Choosing any other value with the C bit clear runs the risk of a collision in the future.
版权声明：本文内容由互联网用户自发贡献，该文观点仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容，请联系我们，一经查实，本站将立刻删除。
如需转载请保留出处：https://51itzy.com/kjqy/191985.html